Analog LCD Countdown Timer

Our analog LCD Countdown Timer has a clear easy to view LCD digital panel on the dial face that is controlled by a switch panel. The analog dial face can be either in a 12 hour format or a 24 hour format. The 24 hour format is ideal for hospital environment where time is charted in a 24 hour format.

The combination of this analog clock and timer is available in a 16″ black standard casing or a 13″ brushed aluminum casing. The performance and operation of both styles is identical. The switch controller is separate from the actual clock. It is tethered to the clock with a wire.

The controller has three buttons; set, start and stop. These simple to use buttons will activate the timer. When the timer is not activated the LCD displays the day, date and month. If the timer is activated in the countdown mode the digital display panel will show the remaining time. In the count up mode the digital display will show the elapsed time.

The clock is part of the KRONOsync master clock system. The system is a wireless system and the 467 MHz transmitter is the brains of the system. The transmitter will broadcast the time code throughout a customer’s facilities creating a matrix type coverage area that allows you to install a clock any place any time.

Many customers will mix and match clocks combining other sync clocks with countdown timers or other Innovation Wireless products such as our message boards. With our system you are able to combine both timing and communication products and operate them on the same frequency.

The analog portion of the timer will display accurate time because it receives accurate GPS or NTP from the transmitter. The transmitter’s time source can either be from GPS or from NTP (Network Time Protocol).

Whatever time sources you decide both are easy to install and no maintenance or upkeep is required. The transmitter will broadcast the time code from either time source. The receiver module on the LCD analog timer will pick up the time and the analog portion will display the time.

The LCD panel which displays the countdown or count up information is 1.375″ by 4″ on the 13″ brushed aluminum framed clock and 1.75″ by 5″ on the 16″ ABS framed clock. These LCD panels provide for able viewing from a respectable distance and angle. If you are looking for a software controlled countdown timer we offer this in our IP – POE Communication System.

The one item that you must determine is how far the switch controller will sit with respect to the placement of the clock. It is best to use a typical LAN cable to connect the controller to the clock. We do not provide the cable do to the various lengths that customers may need.

Our sales and customer service department is willing and able to assist you in putting a wireless synchronized master clock system at your facility. Please call us at 888-559-5565 to see if our products can help you accomplish your goals.